Standard Test Method for Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method

Importancia y uso:

4.1 This test method gives an indication of the relative wear resistance of mortar and concrete based on testing of cored or fabricated specimens. This test method has been successfully used in the quality control of highway and bridge concrete subject to traffic. Primarily intended for use on the top ends of 152-mm [6-in.] diameter concrete cores, mortar specimens, or other samples of concrete of insufficient test area to permit the conduct of tests by Test Method C418 or C779/C779M, this test method is also applicable on concrete surfaces in place by measuring the abrasion loss as described in Section 10, Procedure B, of Test Method C779/C779M.

Subcomité:

C09.62

Referida por:

C1856_C1856M-17, C1803_C1803M-23, C1138M-19, C0779_C0779M-19, C0418-20, C1138M-19, C0418-20, C1856_C1856M-17

Volúmen:

04.02

Número ICS:

91.100.10 (Cement. Gypsum. Lime. Mortar), 91.100.30 (Concrete and concrete products)

Palabras clave:

abrasion; concrete; impact; mortar; wear;