Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters
Importancia y uso:
5.1 This test method is used for determining emission rates and emission factors for wood heaters.
5.1.1 The emission factor is useful for determining emission performance during product development.
5.1.2 The emission factor is useful for the air quality regulatory community for determining compliance with emission performance limits.
5.1.3 The emission rate may be useful for the air quality regulatory community for determining impacts on air quality from wood heaters.
5.2 The reporting units are grams of particulate per hour, grams of particulate per kilogram of dry fuel and grams of particulate per megajoule of heat output.
5.2.1 Appropriate reporting units for comparing emissions from all types of solid fuel fired appliances: g/kg.
5.2.2 Appropriate reporting units for predicting atmospheric emission impacts: g/h or g/MJ.
5.3 The fuel load specified in this test method is a lumber crib of uniform dimensions, identical to that specified in EPA Method 28. Cribs were specified in EPA Method 28 to provide a reproducible and repeatable test method. In normal operation the majority of fuel used by consumers is cordwood with irregular shapes and dimensions. Very little data exists to indicate whether or not the fuel cribs specified in this standard yield results that are predictive of performance using cordwood fuel. This standard, therefore, includes Annex A1 which provides a fueling procedure using cordwood. It is provided so that those interested in measuring emissions performance with cordwood will have a consistent method to follow. A comparative database using the two fueling procedures will provide data to determine whether test results using crib fuel correlate to test results using cordwood fuel.
Subcomité:
E06.54
Referida por:
E2515-11R17, E3053-18E02
Volúmen:
04.12
Número ICS:
97.100.30 (Solid fuel heaters)
Palabras clave:
emissions; particulate; particulate matter; wood-burning; wood heater; wood stove;
$ 1,190
Norma
E2780
Versión
10(2017)
Estatus
Active
Clasificación
Test Method
Fecha aprobación
2017-09-01
