Standard Practice for Ultrasonic Examination of Steel Forgings

Importancia y uso:

4.1 This practice shall be used when ultrasonic inspection is required by the order or specification for inspection purposes where the acceptance of the forging is based on limitations of the number, amplitude, or location of discontinuities, or a combination thereof, which give rise to ultrasonic indications.

4.2 The ultrasonic quality level shall be clearly stated as order requirements.

Subcomité:

A01.06

Referida por:

A0504_A0504M-18R23, A0745_A0745M-24, A0837_A0837M-17R22, A0182_A0182M-26, A0729_A0729M-17R22, A0471_A0471M-19R24, A0503_A0503M-25, A0859_A0859M-23, A0686-92R24, A0765_A0765M-24, A0707_A0707M-25, A0668_A0668M-23, A0646_A0646M-25, A0723_A0723M-18AR23, A0291_A0291M-26, A0711_A0711M-17R22, A0600-92AR24, A0960_A0960M-25A, A1099_A1099M-20R25, A0290_A0290M-26, A0815_A0815M-26, A1049_A1049M-18R23, A0508_A0508M-23A, A0372_A0372M-20R25, A0788_A0788M-25A

Volúmen:

01.05

Número ICS:

77.040.20 (Non-destructive testing of metals), 77.140.85 (Iron and steel forgings)

Palabras clave:

angle-beam examination; back-reflection; DGS; reference block; straight-beam examination; ultrasonic;