Standard Specification for General Requirements for Wrought Copper Alloy Wire

Importancia y uso:

12.1 For the purpose of determining compliance with the specified limits for requirements of the properties listed in the following table, an observed value or calculated value shall be rounded as indicated in accordance with the rounding method of Practice E29.

Property

Rounded Unit for Observed
or Calculated Value

  Dimensions
  Chemical composition
  Hardness
  Electrical resistivity/conductivity

  Nearest unit in the last
   right-hand significant
   digit used in expressing
   the limiting value

  Tensile strength
  Yield strength

  Nearest ksi [5 MPa]
  

  Elongation

   Below 5 %

  Nearest multiple of 0.5 %

   5 % and over

  Nearest 1 %

  Grain size

   Under 0.060 mm

  Nearest multiple of 0.005 mm

   0.060 mm and over

  Nearest 0.01 mm

Subcomité:

B05.02

Referida por:

B0197_B0197M-20E01, B0016_B0016M-24, B0301_B0301M-13R20, B0453_B0453M-19R26, B0950-26, B0099_B0099M-15R21, B0134_B0134M-15R21, B0974_B0974M-16R21, B0159_B0159M-17R24, B0206_B0206M-12R24, B1001-23, B0967_B0967M-18R23, B0981_B0981M-26, B0272-12R19

Volúmen:

02.01

Número ICS:

77.150.30 (Copper products)

Palabras clave:

copper-alloy wires; flat wires; wires; wrought copper-alloy wires;