Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics

Importancia y uso:

5.1 Data from creep and creep-rupture tests are necessary to predict the creep modulus and strength of materials under long-term loads and to predict any dimensional changes that will potentially occur as a result of such loads.

5.2 Data from these test methods are suitable for use: (1) to compare materials, (2) in the design of fabricated parts, (3) to characterize plastics for long-term performance under constant load, and (4) under certain conditions, for specification purposes.

5.3 Before proceeding with this test method, reference shall be made to the specification of the material being tested. Any specimen preparation, conditioning, dimensions, and/or testing parameters covered in the material specification shall take precedence over those mentioned in this test method, except in cases where to do so would conflict with the purpose for conducting testing. If there are no material specifications, then the default conditions apply.

Subcomité:

D20.10

Referida por:

F2947_F2947M-25, D0907-15R23, F0624-25, F2019-22, F2789-25, D5592-94R18, F2922-25A, F3510-21, D7361-07R23, F3430-25, F2881_F2881M-21E01, F2418-25, F2764_F2764M-24, D6992-16R23, D7406-20, D4101-24, F2599-22, F2787-13R25, D5819-22, D6112-23, D5262-21, F2150-19, D4762-23, F0561-19, F2902-24, D7931_D7931M-21A

Volúmen:

08.01

Número ICS:

83.080.01 (Plast in general)

Palabras clave:

creep; creep-rupture; plastics;