Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape

Importancia y uso:

5.1 These test methods are tools for quality assurance use. Given specific pressure-sensitive tape and a requirement in terms of the minimum or maximum peel value expected for this tape, the data from the test can be used in conjunction with acceptance criteria.

5.2 Test Method A, B, C, E, or F can show the relative bond strength of a given tape to one or more surfaces (material and texture) as compared to the standard stainless steel panel. Substitution of representative samples of materials in question for the standard steel panel would suffice to do this.

5.3 Test Methods A, B, C, E or F cannot be used to compare two pressure-sensitive tapes of the same type but of different manufacture for their ability to adhere to a surface. This is because the measured peel force is not normalized for a fixed area of stress. The area under stress varies with backing stiffness and adhesive rheology (firmness). Two different tapes seldom agree in these properties.

5.4 Test Method D can show the amount of force required to remove a liner that covers the adhesive side of a tape at a specified peel rate. The force will be different at other peel rates.

5.5 These test methods may not provide design information as there is usually no direct relationship between peel adhesion and any functional requirement.

Subcomité:

D10.14

Referida por:

B0904-25, A1071_A1071M-11R23, D3611-06R19, D6123_D6123M-97R20, C1423-21, F2252_F2252M-25, B0905-00R21, D6788-24, D7093-19R24, D6551_D6551M-05R25, D4146-10R22, D5330_D5330M-06R20, D2510-22, D3815_D3815M-05R19, D3359-23, D5486_D5486M-06R20, D3359-23, F3208-20

Volúmen:

15.10

Número ICS:

83.180 (Adhesives)

Palabras clave:

adhesion to backing; adhesion to liner; peel adhesion at 90° angle; peel adhesion at 180° angle; pressure sensitive tape;