Standard Test Methods for Manganese in Water

Importancia y uso:

4.1 Elemental constituents in potable water, receiving water, and wastewater need to be identified for support of effective pollution control programs. Test Methods A, B, and C provide the techniques necessary to make such measurements.

4.2 Although inhaled manganese dusts have been reported to be toxic to humans, manganese normally is ingested as a trace nutrient in both food and water. Because it is considered to be relatively nontoxic to man, as well as aquatic life, a limit of 50 μg/L has been established in the EPA National Secondary Drinking Water Regulations. This limit is based primarily on its ability to stain laundry and produce objectionable tastes in beverages.

4.3 Manganese does not occur naturally as a metal but is found in various salts and minerals, frequently in association with iron compounds. Manganese is not mined in the United States except when manganese is contained in iron ores that are deliberately used to form ferro-manganese alloys. Manganese salts are used as fertilizer additives and are commonly found in surface and ground waters.

4.4 ICP-MS or ICP-AES may also be appropriate but at a higher instrument cost. See Test Methods D5673 and D1976.

Subcomité:

D19.05

Referida por:

D1971-16R21E01, D4195-23, D1688-17R25, D1886-14R21E01, C0375-22, D5091-23, D3645-15R23, D3558-15R23, D3557-17R25, D1691-17R25, D8006-25, D1687-17R25, D8006-25, D0857-17R25, D4309-18, D4382-18

Volúmen:

11.01

Número ICS:

13.060.50 (Examination of water for chemical substances)

Palabras clave:

atomic absorption; chelation; flame; graphite furnace; manganese; water;