Standard Guide for Controlling the Quality of Industrial Radiographic Film Processing

Importancia y uso:

4.1 The provisions in this guide are intended to control the reliability or quality of the image development process only. The acceptability or quality of industrial radiographic films processed in this manner, as well as the materials or products radiographed, remain at the discretion of the user, or inspector, or both. It is further intended that this guide be used as an adjunct to, and not a replacement for, Guide E94.

4.2 Users of non-classified film systems may use monitoring films as described in 8.3 for activity testing of film processing.

4.3 If required, film system manufacturers provide a conformity statement on the classification of their film types in their processing chemicals for given processing conditions according to Test Method E1815. Users may apply “mixed systems” in which the film manufacturer is different from the manufacturer of the film development chemicals, processing system, and specified development conditions. In this case, see 8.2.2 and Appendix X1.

Subcomité:

E07.01

Referida por:

E1114-20, E1161-21, E1735-19R24, E0094_E0094M-22, E0592-20, E1742_E1742M-23, E1032-19, E1165-20, E1030_E1030M-21, E2104-22, E1030_E1030M-21, E0543-21, E1032-19, E0746-23, E0543-21

Volúmen:

03.03

Número ICS:

19.100 (Non-destructive testing)

Palabras clave:

automatic processing; film; manual processing; processing; radiographic; solutions ;