Standard Test Method for Static Coefficient of Friction of Polish-Coated Flooring Surfaces as Measured by the James Machine

Importancia y uso:

4.1 Test Method D2047 establishes a compliance criterion relating static coefficient of friction measurements of flooring surfaces with human locomotion safety. The compliance criterion is based on extensive experiential data from residential, commercial, industrial and institutional walkway surfaces since 1942.

Note 1: The compliance criterion does not purport to address the static coefficient of friction of contaminated flooring surfaces.

4.2 Polishes and other floor coatings having a static coefficient of friction of not less than 0.5, as measured by this test method, have been recognized as providing nonhazardous walkways.

Note 2: The value of 0.5 meets the requirements for compliance with Rule 5 on “The use of terms slip retardant, slip resistant, or terms of similar import,” of the Proposed Trade Practice Rules for the Floor Wax and Floor Polish Industry as issued by the Federal Trade Commission on March 17, 1953.

4.3 The 0.5 static coefficient of friction compliance criterion of this test method is only appropriate for polish-coated surfaces tested in accordance with this machine and test method. The use of this compliance criterion with other test methods, other test instruments, and other surfaces is improper, because they are not a part of the body of experiential data upon which the conformance criterion is based.

Note 3: The conformance criteria of this test method may be valid for other surfaces and surface coatings tested by this test method, but this has not been substantiated by correlation with experiential data.

Subcomité:

D21.06

Referida por:

D2825-21E01, C1486-18R23, D7031-11R19, C0722-18R23, D3440-13R19, G0115-24, F3059-24, F1066-23, D3757-16R24, D4078-02R21, D6205-20, D7032-21

Volúmen:

15.04

Número ICS:

71.100.99 (Other products of the chemical industry), 97.080 (Cleaning appliances)

Palabras clave:

coefficient of friction; finishes; flooring; footwear; heel; James Machine; polishes; sole;