Standard Specification for General Requirements for Copper Alloy Castings

Importancia y uso:

14.1 For the purpose of determining compliance with the specified limits for requirements of the properties listed in the following table, an observed value or a calculated value shall be rounded as indicated in accordance with the rounding method of Practice E29.

Property

Rounded Limit for Observed or
Calculated Value

Chemical Composition
Hardness
Electrical Resistivity
Electrical Conductivity

nearest unit in the last right-hand significance digit used in expressing the limiting value

Tensile Strength

nearest ksi (5 MPa)

Yield Strength

Elongation

nearest 1 %

Grain Size:

 Under 0.060 mm

nearest multiple of 0.005 mm

 0.060 mm and over

nearest 0.01 mm

Subcomité:

B05.05

Referida por:

B0062-17, B0062-17, B0770-21, B0505_B0505M-23, B0067-14R22, B0022_B0022M-17, B0061-15R21, B0148-24, B0427-21, B0950-23, B0763_B0763M-23, B0176-18R24, B0066-15R21, B0271_B0271M-23, B0369_B0369M-24, B0584-22, B0806-23

Volúmen:

02.01

Número ICS:

77.150.30 (Copper products)

Palabras clave:

copper alloy castings; copper-base alloy castings; UNS No. C94700; UNS No. C95300; UNS No. C95400; UNS No. C95410; UNS No. C95500; UNS No. C95520; UNS No. C96800;