Standard Test Method for Cell Size of Rigid Cellular Plastics

Importancia y uso:

5.1 Several physical properties of rigid cellular plastics are dependent on cell size and cell orientation. Measuring water absorption and open-cell content in accordance with Test Method D2842 Procedure A, and Test Method D6226 requires knowledge of surface cell volume, which uses cell size values in the calculations.

5.2 This test method provides an apparent cell size because it assumes that there is no measurable edge to edge or top to bottom variation in average cell size and that the cell size distribution about the average cell size is normal. If the analyst is concerned there may be significant variation in either the average cell size or the cell size distribution more detailed analysis may be required.

5.3 Before proceeding with this test method, reference should be made to the specification of the material being tested. Any test specimen preparation, conditioning, dimensions, or testing parameters, or a combination thereof, covered in the materials specification shall take precedence over those mentioned in this test method. If there are no material specifications, then the default conditions apply.

Subcomité:

D20.22

Referida por:

D3574-17, D2842-19, D6226-21

Volúmen:

08.02

Número ICS:

83.100 (Cellular materials)

Palabras clave:

cell size; rigid cellular plastics;