Standard Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates

Importancia y uso:

4.1 The procedures described in this practice are intended to aid in evaluating the performance of coatings on various metal panels including either new or rusted steel.

4.2 The relative durability of paints in outdoor exposures can be very different depending on the location of the exposure because of differences in solar radiation, time of wetness, temperature, pollutants, and other factors. Therefore, it cannot be assumed that results from one exposure in a single location will be useful for determining relative durability in a different location. Exposures in several locations with different climates which represent a broad range of anticipated service conditions are recommended.

4.2.1 Because of year-to-year climatological variations, results from a single exposure test cannot be used to predict the absolute rate at which a material degrades. Several years of repeat exposures are needed to get an “average” test result for a given location.

4.2.2 Solar radiation varies considerably as function of time of year. This can cause large differences in the apparent rate of degradation in many polymers. Comparing results for materials exposed for short periods (less than one year) is not recommended unless materials are exposed at the same time in the same location.

4.3 The Significance and Use in Practice G7/G7M addresses many variables to be considered in exterior exposure tests. Guide G141 provides more information on variability in weathering testing.

Subcomité:

D01.27

Referida por:

D1654-24, D0333-01R21, D3451-24, D1654-24, D3456-24, D6675-23, D3794-22, D6577-24A, D5324-16R22, D5146-10R19, G0090-23

Volúmen:

06.01

Número ICS:

87.040 (Paints and varnishes)

Palabras clave:

coating; durability; exposure; metal; paint; powder coating; weathering;