Standard Practice for Contact Ultrasonic Testing of Weldments

Importancia y uso:

3.1 The techniques for ultrasonic examination of welds described in this practice are intended to provide a means of weld examination for both internal and surface discontinuities within the weld and the heat-affected zone. The practice is limited to the examination of specific weld geometries in wrought or forged material.

3.2 The techniques provide a practical method of weld examination for internal and surface discontinuities and are well suited to the task of in-process quality control. The practice is especially suited to the detection of discontinuities that present planar surfaces perpendicular to the sound beam. Other nondestructive examinations may be used when porosity and slag inclusions must be critically evaluated.

3.3 When ultrasonic examination is used as a basis of acceptance of welds, there should be agreement between the manufacturer and the purchaser as to the specific reference standards and limits to be used. Examples of reference standards are given in Section 7. A detailed procedure for weld examination describing allowable discontinuity limits should be written and agreed upon.

Subcomité:

E07.06

Referida por:

E2375-22, E2700-20, A1069_A1069M-23, E2700-20, E1961-16R21, F0914_F0914M-20R24, A1123_A1123M-22, F1430_F1430M-20R24, A1127_A1127M-23, E2373_E2373M-19R24, E0543-21, E2981-21, F1797-18R22, E0543-21

Volúmen:

03.03

Número ICS:

25.160.40 (Welding joints and welds)

Palabras clave:

NDT of weldments; nondestructive testing; ultrasonic contact examination; ultrasonic NDT of weldments; weldments;