Standard Test Methods for Integrity of Adhesive Joints in Structural Laminated Wood Products for Exterior Use

Importancia y uso:

4.1 The test is suitable for check testing properly selected samples from regular production or for determining the suitability of adhesives and bonding techniques for the production of joints for exterior service.

4.2 Vary the number of specimens taken from each member and the number of members selected for test depending on the total number of members involved and the purpose of the tests. It is advisable, however, to include at least three specimens in the test, with the specimens selected to represent the probable range of quality of the adhesive joints.

4.3 Adhesive joints at knots and knotty areas in general are not dependable under severe exposures. Disregard development of delamination at knots and do not include in the measurements or calculations.

Subcomité:

D14.30

Referida por:

D5574-94R21, D7966_D7966M-16R23, D7469-23

Volúmen:

15.06

Número ICS:

83.180 (Adhesives)

Palabras clave:

exterior use; glulam; laminated wood; structural-glued-laminated timber; structural laminated wood;