Standard Test Method for Determination of Lead by Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES)

Importancia y uso:

5.1 This test method is intended for use with other standards that address the collection and preparation of samples (airborne particulate, dusts by wipe and micro-vacuuming, dried paint chips, and soils) that are obtained during the assessment or mitigation of lead hazards from buildings and related structures.

5.2 Laboratories analyzing samples obtained during the assessment or mitigation of lead hazards from buildings and related structures shall conform to Practice E1583, or shall be recognized for lead analysis as promulgated by authorities having jurisdiction, or both.

Note 1: In the United States of America, laboratories performing analysis of samples collected during lead-based paint activities are required to be accredited to ISO/IEC 17025 and to other requirements promulgated by the Environmental Protection Agency (EPA).

5.3 This test method may also be used to analyze similar samples from other environments such as toxic characteristic extracts of waste sampled using Guide E1908 as prepared for analysis using EPA SW-846 Test Method 1311.

Subcomité:

D22.12

Referida por:

D7439-21, E1792-24, E2119-24, E1728_E1728M-24, E1729-24, E1644-21, E1775-24, D7659-21, D8344-24, E1727-24, E2115-22, E1583-21A, D7035-21

Volúmen:

11.07

Número ICS:

87.040 (Paints and varnishes)

Palabras clave:

ICP-OES; instrumental analysis; lead;