Standard Test Method for Tuft Height of Pile Floor Coverings

Importancia y uso:

5.1 This test method is useful in quality and cost control during the manufacture of pile yarn floor covering. Both appearance and performance can be affected by changes in the tuft height.

5.1.1 In case of a dispute arising from differences in reported test results when using this test method for acceptance testing of commercial shipments, the purchaser and the supplier should conduct comparative tests to determine if there is a statistical bias between their laboratories. Competent statistical assistance is recommended for the investigation of bias. As a minimum, the two parties should take a group of test specimens that are as homogeneous as possible and are from a lot of material of the type in question. The test specimens should then be randomly assigned in equal numbers to each laboratory for testing. The average results from the two laboratories should be compared using Student's t-test for unpaired data and an acceptable probability level chosen by the two parties before testing is begun. If a bias is found, either its cause must be found and corrected or the purchaser and the supplier must agree to interpret future test results in view of the known bias.

Subcomité:

D13.21

Referida por:

D5684-19A, D7241-22, F1551-23, D6859-18R24, D6719-22E01

Volúmen:

07.02

Número ICS:

97.150 (Floor coverings)

Palabras clave:

carpet; construction; pile yarn floor covering; tuft height ;