Standard Practice for Construction of Asphalt-Rubber Cape Seal

Importancia y uso:

3.1 The procedure described in this practice is used to design and construct an asphalt-rubber cape seal that will provide a wearing course when subjected to low to medium traffic volumes and where the pavement distress is due to block-type cracking resulting from pavement aging or reflective cracking only (not where there are clear indications of fatigue cracking due to repeated heavy axle loads).

Note 2: Block cracking is defined in Practice D6433. See Appendix X1 for an example of block cracking due to aging.

Subcomité:

D04.24

Referida por:

D8418-21

Volúmen:

04.03

Número ICS:

93.080.20 (Road construction materials)

Palabras clave:

asphalt-rubber; cape seal; chip seal; slurry seal; stress absorbing membrane (SAM);