Standard Test Method for Sulfated Ash from Lubricating Oils and Additives

Importancia y uso:

5.1 The sulfated ash can be used to indicate the concentration of known metal-containing additives in new oils. When phosphorus is absent, barium, calcium, magnesium, sodium and potassium are converted to their sulfates and tin (stannic) and zinc to their oxides (Note 4). Sulfur and chlorine do not interfere, but when phosphorus is present with metals, it remains partially or wholly in the sulfated ash as metal phosphates.

Note 4: Since zinc sulfate slowly decomposes to its oxide at the ignition temperature specified in the test method, samples containing zinc can give variable results unless the zinc sulfate is completely converted to the oxide.

5.2 Because of above inter-element interferences, experimentally obtained sulfated ash values may differ from sulfated ash values calculated from elemental analysis. The formation of such non-sulfated species is dependent on the temperature of ashing, time ashed, and the composition of metal compounds present in oils. Hence, sulfated ash requirement generally should not be used in product specifications without a clear understanding between a buyer and a seller of the unreliability of an ash value as an indicator of the total metallic compound content.4

Subcomité:

D02.03

Referida por:

D4682-18, D6751-24, D7455-24, D0482-19, D6751-24, D0482-19, E2403-23, D4310-22A, D4485-22E01, D6751-24, D7876-13R18, D7876-13R18, D0482-19, D0482-19, D7578-20

Volúmen:

05.01

Número ICS:

75.100 (Lubricants, industrial oils and related products)

Palabras clave:

additives; ash; lubricating oils;