Standard Test Method for Determination of the Upper Layer Separated from a Viscous Liquid


Importancia y uso:

4.1 The United Nations Committee of Experts on the Transport of Dangerous Goods in their recommended regulations place materials having a flash point below 23 °C (73.5 °F) in Packing Group II. However, if viscous substances such as paint and related coatings, adhesives, polishes, etc., meet certain requirements, they can be placed in Group III along with materials having a flash point between 23 °C and 60.5 °C (73.5 °F and 140 °F). One of the requirements is that less than 3 % of clear liquid separates from the bulk of the material when subjected to this test method.

4.2 At the present time most international regulatory bodies such as the International Civil Aviation Organization (ICAO) and the International Maritime Organization (IMO) use the U.N. Recommendations. It is anticipated that most national transportation regulatory bodies will adopt the U.N. Recommendations as their regulations for control of transportation of hazardous materials. At present the United States permits the transshipment of hazardous materials through the United States to other countries under regulations of the IMO and ICAO.

Subcomité:

D01.21

Volúmen:

06.01

Número ICS:

07.030 (Physics. Chemistry)

Palabras clave:

upper layer; viscous liquid;

$ 952

Agregar al carrito

Norma
D4948

Versión
89(2022)

Estatus
Active

Clasificación
Test Method

Fecha aprobación
2022-12-01