Standard Test Method for Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry

Importancia y uso:

5.1 This test method provides measurement of total sulfur in automotive, No. 2 heating, and jet fuels with a minimum of sample preparation. A typical analysis time is 180 s to 360 s per sample.

5.2 The quality of automotive, No. 2 heating, and jet fuel can be related to the amount of sulfur present. Knowledge of sulfur concentration is necessary for processing purposes. There are also regulations promulgated in federal, state, and local agencies that restrict the amount of sulfur present in some fuel.

5.3 If this test method is applied to petroleum materials with matrices significantly different from the calibration materials specified in this test method, the cautions and recommendations in Section 6 should be observed when interpreting the results.

Subcomité:

D02.03

Referida por:

D0396-24, D0975-24A, D2880-23, D7343-20, D4814-24A, D6227-24, D8011-19, D7547-23, D8076-24, D8110-17, D7960-21, D7455-24, D8275-22, D0975-24A, D3699-19, D4814-24A, D7719-21A, D7826-24, D7467-23, D7467-23, D0975-24A, D4814-24A, D7578-20

Volúmen:

05.03

Número ICS:

75.160.20 (Liquid fuels)

Palabras clave:

automotive fuel; diesel; gasoline; petroleum; polarization; spectrometry; sulfur; X-ray;