Standard Test Method for Iron Chip Corrosion for Water–Miscible Metalworking Fluids

Importancia y uso:

5.1 The results obtained by this test are a useful guideline in determining the ability of water-miscible metalworking fluids to prevent or minimize rust under specific conditions. There is usually a relationship between the results of this test and a similar ability of the subject coolant to prevent rust on nested parts or in drilled holes containing chips, etc. It must be understood, however, that conditions, metal types, etc. found in practice will not correlate quantitatively with these controlled laboratory conditions. The procedure may not be able to differentiate between two products with poor rust control due to the wide spacing between test dilutions.

Subcomité:

D02.L0.01

Referida por:

E2275-19

Volúmen:

05.02

Número ICS:

75.080 (Petroleum products in general), 75.100 (Lubricants, industrial oils and related products)

Palabras clave:

corrosion test; ferrous corrosion test; iron chip corrosion test; metalworking fluid corrosion test; water-miscible fluids corrosion test;