Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage

Importancia y uso:

5.1 Many coating properties are markedly affected by the film thickness of the dry film such as adhesion, flexibility, wear, durability, chemical resistance, and hardness. To be able to compare results obtained by different operators, it is essential to measure film thickness carefully.

5.2 Most protective and high performance coatings are applied to meet a requirement or a specification for the dry-film thickness of each coat, or for the complete system, or both. Coatings must be applied within certain minimum and maximum thickness tolerances in order that they can fulfill their intended function. In addition to potential performance deficiencies, it is uneconomical to apply more material than necessary when coating large areas such as floors and walls.

5.3 Low readings may occur occasionally on coatings with rough surfaces. The instrument may allow a user adjustment to prevent this.

5.4 This test method may not be applicable to measure organic coating thickness on all substrates. The instrument's ability to detect a distinct interface between the coating and the substrate may be impeded if the coating and the substrate are of similar composition, density or attenuation or if the coating is non-homogeneous. Verify operation on a known thickness of the coating/substrate combination if these circumstances are thought to exist.

5.5 Multilayered coatings have many interfaces and the instrument will measure to the interface separating the two most acoustically different materials. Some instruments have the ability to detect and measure the individual layer thicknesses in a multi-layer system.

5.6 The use of this test method is not necessarily limited by the type of substrate material.

Subcomité:

D01.23

Referida por:

D6944-15R20, D3451-24, F3078-15R23, D3456-24, D5064-16AR21, D6943-15R24, D5795-16R24, C0722-18R23, D5702-18R22, D6577-24, D5498-12AR18, D5590-17R21, D4787-24, D7378-16R24, D6677-18R22, D7835_D7835M-23, D1006_D1006M-21, D6237-24

Volúmen:

06.01

Número ICS:

25.220.60 (Organic coatings), 71.040.50 (Physicochemical methods of analysis)

Palabras clave:

coatings; coating thickness; dry film thickness; nondestructive thickness; paint thickness; thickness testing; ultrasonic thickness gage;