Standard Practice for Production Acceptance in the Manufacture of a Fixed Wing Light Sport Aircraft

Importancia y uso:

4.1 The purpose of this practice is to provide the minimum requirements necessary for the establishment of a production acceptance program for a manufacturer of light sport aircraft.

4.2 The purpose of this specification is to provide the minimum requirements for the establishment of a ground and flight test program for verifying the initial production aircraft meets certain operational performance requirements that have been set forth by the manufacturer in its Pilot’s Operating Handbook (POH).

4.3 In addition, this specification provides minimum requirements to verify that each subsequent production airplane has no obvious defects that would prevent the safe operation of the airplane.

4.4 All requirements given in this specification are to be performed in accordance with the manufacturer’s Specification F2972-compliant quality assurance system requirements.

4.5 The following criteria should not be construed as requirements for specific features to be included on a LSA. When a requirement specifies a feature that does not exist on a LSA, the requirement does not apply.

Subcomité:

F37.02

Referida por:

F3815-26, F2563-16R25, F3060-25, F2930-16R25

Volúmen:

15.09

Número ICS:

49.020 (Aircraft and space vehicles in general)

Palabras clave:

LSA; manufacture; production acceptance;