Standard Practice for Magnetic Particle Testing for General Industry

Importancia y uso:

4.1 Description of Process—Magnetic particle testing consists of magnetizing the area to be examined, applying suitably prepared magnetic particles while the area is magnetized, and subsequently interpreting and evaluating any resulting particle accumulations. Maximum detectability occurs when the discontinuity is positioned on the surface and perpendicular to the direction of magnetic flux in the part.

4.2 This practice establishes the basic parameters for controlling the application of the magnetic particle testing method. This practice is written so that it can be specified on the engineering drawing, specification, or contract. It is not a detailed how-to procedure to be used by the examination personnel and, therefore, must be supplemented by a detailed written procedure that conforms to the requirements of this practice.

Subcomité:

E07.03

Referida por:

E1444_E1444M-22A, E1444_E1444M-22A, E0543-21, E0709-21, E0543-21

Volúmen:

03.04

Número ICS:

77.040.20 (Non-destructive testing of metals)

Palabras clave:

dye; flourescent; FP; FPI; magnetic particle; MPI; MT; NDT; nondestructive evaluation; nondestructive examination; nondestructive testing;