Standard Test Method for Unsteady-State Heat Transfer Evaluation of Flame-Resistant Materials for Clothing with Burn Injury Prediction

Importancia y uso:

5.1 This test method is intended for the determination of a thermal performance estimate value of a material, a combination of materials, or a comparison of different materials used in flame-resistant clothing for workers exposed to combined convective and radiant thermal hazards.

5.2 This test method evaluates a material’s heat transfer properties when exposed to a heat exposure at a constant value and specific duration. Air movement at the face of the specimen and around the calorimeter can affect the measured heat transferred due to forced convective heat losses. Minimizing air movement around the specimen and test apparatus will aid in the repeatability of the results.

5.3 This test method accounts for the thermal energy stored in the exposed test specimen after the heat exposure has ceased. Higher values of thermal performance estimate ratings determined in this test associate to higher values of thermal (convective and radiative) energy protection against a predicted skin burn injury.

5.4 This test method maintains the specimen in a static, horizontal position and does not involve movement except that resulting from the exposure.

5.5 This test method specifies a standardized 84 ± 2 kW/m² (2 ± 0.05 cal/cm²·s) exposure condition. Different exposure conditions have the potential to produce different results. Other exposure conditions representative of the expected hazard are allowed but shall be reported with the results along with a determination of the exposure energy level stability.

5.6 This test method contains optional provisions for conducting certification testing against a prescribed thermal performance estimate value.

Subcomité:

F23.80

Referida por:

F2700-08R20

Volúmen:

11.03

Número ICS:

13.340.10 (Protective clothing)

Palabras clave:

apparel; flame resistance; protective clothing; thermal heat protection; thermal performance estimate;