Standard Test Method for Rubber Property—Abrasion Resistance (Footwear Abrader)

Importancia y uso:

3.1 It is recognized that when comparing different types of rubber materials, the service performance may not correlate to the results of this predictive test.

3.2 This test method should not be used as a measure of abrasion resistance for compositions that differ markedly from the standard reference compound. Misleading results, for example, are obtained from polyurethane compositions when compared with the standard reference compound.

3.3 Some specimens may bounce (chatter) against the abrasive paper, producing inaccurate results. These should be interpreted with care and the condition reported.

3.4 If test results are inconsistent, the specimens should be cut, after the test is run, and inspected for voids. If any voids are present, the results should be disregarded and the test repeated using test specimens that are free from voids.

Subcomité:

D11.15

Referida por:

D2047-17, F1296-08R23, D3489-23

Volúmen:

09.01

Número ICS:

83.060 (Rubber)

Palabras clave:

abrader; abraser; abrasion; abrasion index; abrasion resistance; abrasive; break-in compound; footwear; footwear abrader; National Bureau of Standards; NBS abrader; reference compound; RMA;