Standard Test Method for Evaluating Coatings Used in Light-Water Nuclear Power Plants at Simulated Design Basis Accident (DBA) Conditions

Importancia y uso:

4.1 This test method is designed to provide a uniform test to determine the suitability of Coating Service Level 1 coatings used inside primary containment of light-water nuclear facilities under simulated DBA conditions. This test method is intended only to demonstrate that under DBA conditions, the coatings will remain intact and not form debris which could unacceptably compromise the operability of engineered safety systems. Deviations in actual surface preparation and in application and curing of the coating materials from qualification test parameters require an engineering evaluation to determine if additional testing is required.

4.2 Since different plants have different tolerance levels for coating conditions, the definition of appropriate acceptance criteria is to be developed by the license holder based on individual plant engineered safety systems operability considerations.

4.3 Use of this standard is predicated on the testing facility having a quality assurance program acceptable to the licensee.

Subcomité:

D33.02

Referida por:

D4538-21, D8104-17R23, D8157-19, D5144-08R21

Volúmen:

06.02

Número ICS:

87.040 (Paints and varnishes)

Palabras clave:

coatings; Coating Service Level I; containment; DBA; design basis accident; LOCA-loss of coolant accident; nuclear;