Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing

Importancia y uso:

4.1 These test methods include procedures for sampling, examination, physical testing, and analyses of asphalt roll roofing, cap sheets, and shingles used in roofing and waterproofing. Other components of these materials are allowed to include, but are not limited to: felts, mats, films, foils, mineral stabilizers, papers, and mineral surfacing.

4.2 These test methods include tests that are not required by every product standard that references Test Methods D228/D228M. The individual product standards are the authority for which tests are required for compliance. It is not prohibited to run tests in addition to those required in the product standards, but these test methods make no claim to their suitability or significance.

4.3 A minimum of five random samples are required from lots equal to or less than 1000 packages. See Section 7 for sampling details.

4.4 The results of a visual examination, physical testing, and compositional analysis are required for each sample. The analytical data are further used to compute the probable minimum and the probable range for the average mass of each of the components.

Subcomité:

D08.02

Referida por:

D2626_D2626M-04R20, D4601_D4601M-04R20, D3105-17R24, D6380_D6380M-03R22, D8257_D8257M-22, D3018_D3018M-22, D6757_D6757M-18R23, D1970_D1970M-21, D6381_D6381M-24, D3462_D3462M-23, D4897_D4897M-16R23, D3909_D3909M-22, D6221_D6221M-00R21, D7158_D7158M-24A

Volúmen:

04.04

Número ICS:

91.100.60 (Thermal and sound insulating materials)

Palabras clave:

analysis; asphalt; cap sheets; composition; physical testing; roll roofing; sampling; shingles;