Standard Test Method for Stretch Properties of Textile Fabrics – CRE Method

Importancia y uso:

5.1 This method is used to determine the stretch and growth properties which a garment made of the fabric may be expected to exhibit during use.

5.2 This is a new method and therefore the history of data is very small, however the excellent agreement of between-laboratory data suggest this method may be considered for acceptance testing of commercial shipments.

5.2.1 If there are differences of practical significance between reported test results for two laboratories (or more), comparative test should be performed to determine if there is a statistical bias between them, using competent statistical assistance. As a minimum, samples used for such comparative tests should be as homogeneous as possible, drawn from the same lot of material as the samples that resulted in disparate results during initial testing, and randomly assigned in equal numbers to each laboratory. Other fabrics with established test values may also be used for these comparative tests. The test results from the laboratories involved should be compared using a statistical test for unpaired data, at a probability level chosen prior to the testing series. If bias is found, either its cause must be found and corrected, or future test results must be adjusted in consideration of the known bias.

Subcomité:

D13.59

Referida por:

D4850-23

Volúmen:

07.02

Número ICS:

59.080.30 (Textile fabrics)

Palabras clave:

fabric growth; fabric stretch;