Standard Practices for Preparation of Oil-Based Ink Resin Solutions

Importancia y uso:

5.1 These practices provide means of preparing small quantities of resin solution (in some procedures in an inert gas atmosphere using uniform, controlled heating).

5.2 This practice provides quick ways to prepare a resin solution for quality control testing during the manufacture of resin solutions and vehicles. Samples can usually be prepared in approximately 30 to 45 minutes or less.

5.3 These practices can be used to prepare commonly specified ink test solutions such as 33.3 % resin in alkali refined linseed oil, and 50 % resin in heat-set ink solvent (that is, C₁₂ to C₁₆ hydrocarbon petroleum distillate with initial boiling point (IBP) about 470°F).

Subcomité:

D01.37

Volúmen:

06.03

Número ICS:

87.080 (Inks. Printing inks)

Palabras clave:

cold cut; compatibility; dissolution; incompatible; precipitation temperature; solution;