Standard Test Method for Stiffness of Bare Soft Square and Rectangular Copper and Aluminum Wire for Magnet Wire Fabrication

Importancia y uso:

3.1 This test method is designed as an inspection or acceptance test of new bare soft square and rectangular wire intended for subsequent fabrication into magnet wire.

Note 1: Since the applied unit stress and the time of application are constant for all wire sizes, the test enables comparisons of stiffness to be made between wires of the same or different size on the basis of the permanent elongation resulting from the application of a low unit stress.

Subcomité:

B01.02

Referida por:

B0324-01R21, B0048-00R21E01, D1676-24

Volúmen:

02.03

Número ICS:

29.060.10 (Wires)

Palabras clave:

aluminum wire; copper wire; soft square and rectangular aluminum wire; soft square and rectangular copper wire;