Standard Test Method for Yarn Number Using Automatic Tester

Importancia y uso:

5.1 This test method for yarn number is satisfactory for acceptance of commercial shipments and is used in the trade.

5.1.1 In case of a dispute arising from differences in reported test results when using this Test Method for acceptance testing of commercial shipments, the purchaser and the supplier should either use the referee Test Method D1907 for yarn number or conduct comparative tests to determine if there is a statistical bias between their laboratories. Competent statistical assistance is recommended for the investigation of bias. As a minimum, the two parties should take a group of test specimens that are as homogeneous as possible and that are from a lot of material of the type in question. The test specimens should then be randomly assigned in equal numbers to each laboratory for testing. The average results from the two laboratories should be compared using appropriate statistical analysis and a probability level chosen by the two parties before the testing is begun. If a bias is found, either its cause must be found and corrected or the purchaser and the supplier must agree to interpret future test results with consideration to the known bias.

5.2 This test method is also used for the quality control for both filament and spun yarns.

Subcomité:

D13.58

Referida por:

D8054_D8054M-22, D7269_D7269M-20, D4849-21

Volúmen:

07.02

Número ICS:

59.080.20 (Yarns)

Palabras clave:

linear density; yarn; yarn number;