Standard Guide for Selecting Test Methods for Geomembrane Seams


Importancia y uso:

4.1 There are a large number of geomembrane types and seaming techniques. This guide is intended to help practitioners select the appropriate seam test methods for their material.

4.2 Geomembranes are relatively impermeable planar materials sheets that are shipped either as rolls or folded panels. The panels may be seamed in a factory or in the field. This guide provides geomembrane users with the most appropriate seam evaluation techniques for the most common geomembrane materials available on the market.

4.3 Some types of geomembrane may not be listed and some seam evaluation techniques may offer a good performance with a given material although this may not be indicated in Table 1. Users who are aware of this situation are invited to contact ASTM to propose an update of this guide.


X   =   Applicable   =   Not Applicable O   =   May Be Applicable (A) This type of test not commonly performed on this type of material, but it can be performed if desired.(B) Only provides evaluation of seam continuity, but not seam strength.(C) May not be applicable to very flexible geomembranes, especially thinner ones, that will highly deform into the vacuum box.(D) There are some experiences with air lance on HDPE geomembrane seams for hole detection, although this is not common practice.(E) Typically applicable to materials that are 1.0 mm and thinner.(F) When applicable.(G) Applicable to dual track seam only.(H) Not applicable to extrusion fillet.(I) Applicable to factory seams only.(J) Refer to Guide D6747.(K) Electrical leak location surveys are useful to monitor the continuity of seams, as well as to survey the entire sheet after installation and, where applicable, while covered with earthen or liquid materials. They do not verify material or seam integrity.

4.4 The relevance of a seaming technique within a particular engineering context is beyond the scope of this guide.

Subcomité:

D35.10

Referida por:

D7982-15R21

Volúmen:

04.13

Número ICS:

59.080.70 (Geotextiles)

$ 954

Agregar al carrito

Norma
D7700

Versión
22

Estatus
Active

Clasificación
Guide

Fecha aprobación
2022-07-01