Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials

Importancia y uso:

5.1 This test method provides a means for determining the specific optical density of the smoke generated by specimens of materials and assemblies under the specified exposure conditions. Values determined by this test are specific to the specimen or assembly in the form and thickness tested and are not to be considered inherent fundamental properties of the material tested. Thus, it is likely that closely repeatable or reproducible experimental results are not to be expected from tests of a given material when specimen thickness, density, or other variables are involved.

5.2 The photometric scale used to measure smoke by this test method is similar to the optical density scale for human vision. However, physiological aspects associated with vision are not measured by this test method. Correlation with measurements by other test methods has not been established.5

5.3 At the present time no basis is provided for predicting the density of smoke generated by the materials upon exposure to heat and flame under other fire conditions.

5.4 The test method is of a complex nature and the data obtained are sensitive to variations which in other test methods might be considered to be insignificant (see Section 6). A precision statement based on the results of a round-robin test by a prior draft version of this test method is given in 14.1

5.5 In this procedure, the specimens are subjected to one or more specific sets of laboratory test conditions. If different test conditions are substituted or the end-use conditions are changed, it is not always possible by or from this test method to predict changes in the fire-test-response characteristics measured. Therefore, the results are valid only for the fire test exposure conditions described in this procedure.

Subcomité:

E05.21

Referida por:

D3574-17, D5205-24, D7745-19, D7295-18, F1085-19R24, E0662-21AE01, C1482-24E01, D2843-22, E0800-20, D4000-23, E3020-22, F3214-23, D4727_D4727M-22, F1870-22, C1410-17R23, F3214-23, D4067-23, F1534-22, C1594-23, D8318-20, E1623-22A, E2280-21, E1354-23, E2061-23, D6719-22E01, E1995-21

Volúmen:

04.07

Número ICS:

13.220.40 (Ignitability and burning behaviour of materials and products), 17.180.99 (Other standards related to optics and optical measurements)

Palabras clave:

fire; fire-test response standard; smoke; smoke chamber; smoke density; smoke obscuration; solids; specific optical density ;